DS18 NXL 8″ 2-Way Coaxial Marine Speaker With RGB LED Lights 125 Watts RMS 4-Ohm

DS18s NXL-8M is engineered for those who refuse to settle. These speakers deliver breathtaking sound in a cutting-edge design, tailored to withstand the harshest marine and off-road environments.

With IP65 Marine Grade Certification, these beasts endure saltwater, UV rays, and extreme temperatures. The high-temp injection-molded composite construction and detachable stainless-steel mesh grills offer resilience, protection and endless customization. The new silicone cover adds a tough, sleek layer of defense for even more durability.

Handling an impressive 125W RMS power, these speakers deliver loud, crystal-clear sound. Equipped with Y35 Ferrite Main Magnet and Reverse Neodymium, these speakers deliver astonishingly clear and powerful sound. Thanks to the revolutionary 2-way design that incorporates a 25mm Titanium Dome Tweeter, you’ll experience the full range of frequencies, capturing every nuance of your favorite tracks. The NXL-8Ms sensitivity of 93dB at 1 w/m, offer an unmatched level of detail and precision in every note.

Take your experience up a notch with vibrant RGB LED lighting, fully customizable to match your vibe using the optional LED-BTC or other RF/BT/Wi-Fi Controllers (sold separately).

The NXL-8M dominates. Its rugged, stylish, and performs like the legend it is. Upgrade today for sound that never goes out of style!

Features:

• 8″ 2-Way Marine Speaker
• RMS Power: 125 Watts
• Impedance: 4 Ohm
• Ferrite & Neodymium Magnets
• RGB LED Light
• Water Resistant IP65
• Silicone Cover Included
• Detachable Grille

Instructions:

• NXL-8M Hydro Speakers Web Manual V1

Specifications:

Specs:

• Nominal Diameter: 8″ / 203mm
• Nominal Impedance: 4 Ohm
• RMS Power Handling: 125W
• MAX Power Handling: 375W
• Sensitivity (1w/1m): 93dB
• Frequency Response: 35Hz-23KHz
• Recommended HI Pass Crossover: 50 Hz

Body / Features:

• UV Compliant:Yes, 100% Stable
• Marine Grade Type: IP65
• RGB LED: Yes, RGB integrated
• Grill Type: Injection Molded Composite ASA with 316 Stainless Steel mesh
• Pair: Yes
• Color / Finish: Glossy White, Matte Black

Woofer Specifications:

• Voice Coil Diameter: 1.2″ / 30.5mm
• Voice Coil Former Material: Kapton
• Winding Material: CCAW
• Cone Material: Injection Molded Polypropylene + UV Compliant
• Surround Material: Butyl (Rubber)
• Basket Material: High Temp Injection Molded Composite ASA with UV Protection coating
• Magnet Material: Ferrite+Neodymium
• Magnet Weight: 24oz + 0.32oz

Tweeter Specifications:

• Nominal Diameter:1″ / 25.4mm
• Voice Coil Diameter: 1″ / 25.4mm
• Voice Coil Former Material: Kapton
• Winding Material: CCAW
• Diaphragm Material: Titanium + PEI Surround
• Magnet Material: Neodymium (N38H)
• Magnet Weight: 0.54oz

Thiele & Small Parameters:

• Equivalent Volume Vas:66.7L / 2.35ft3
• Excursion (one way) Xmax: 8.5 mm
• Free Air Resonance Fs: 56Hz
• Mechanical Factor Qms: 7.701
• Electrical Factor Qes: 0.899
• Total Factor Qts: 0.805
• Moving Mass Mms: 7.265g
• Compliance Cms: 1.119mm/N
• Bl Factor Bl: 2.98
• Voice Coil Inductance Le: 0.49mH
• Cone Area Sd: 206.12cm2
• DC Resistance Re: 3.15ohms
• Efficiency Bandwidth Product EBP: 62.2

Speaker Measurement:

• Overall Diameter:8.59″ / 218.2mm
• Overall Depth: 4.45″ / 113mm
• Front Mount Baffle Cutout: 6.97″ / 177mm
• Mounting Depth: 3.09″ / 78.5mm
• Motor Diameter: 4.32″ / 110mm
• Gross Single Unit Weight (lb.): 10.5
• Single Unit Box Dimensions W x L x H (Inches): 20 x 10.5 x 5.5
• Quantity of Units in Master Carton: 2
• Gross Master Carton Weight (lb.): 23
• Master Carton Dimensions W x L x H (Inches): 20 x 11.5 x 11.5