CLAMPLESS STARTING HARNESS

Accessory for Micro-Start XP-1 or XP-3 (Newer models)

The MICRO-START Clampless Harness was made so that a rider or driver can easily jump-start their vehicle using just their Micro-Start without the need for the jumper clamps, or having to remove the seat on your motorcycle. It is a 16-inch harness that connects directly to the battery with ring terminals while the other end can plug directly into the Micro-Starts jumpstart port. It adds convenience and saves time if the situation arises when you have to jump start your vehicle. Simply connect the Micro-Start directly to this harness and jump-start your vehicle. No need to get out your Micro-Start clamps!

MSA-10TP

COMPATIBLE WITH

• XP-1 (New Design)
• XP-3 (New Design)

TIP DIFFERENCE

Please refer to the images below to see how the tips differ between the Starting Harnesses. The XP-10 harness connector is curved. The Old XP-3 and XP-1 harness tips are an EC5 connector. The New XP-3 and XP-1 have thermal protection and you can see the pin hole in its connector tip.

XP-10 & XP-10-HD

SPORT, Older XP-3 & XP-1

New XP-3 & XP-1

SAFETY NOTES:

1. The MICRO-START is for Jump-Starting ONLY through the Jump-Start port!
2. Never leave the Micro-Start connected to your vehicles battery for longer than 30 seconds, or use in place of your regular battery in your vehicle.
3. Use only the provided chargers in the Micro-Starts kit to charge the Micro-Start.