Dalton Industries ’15 Polaris RZR 900 Trail/900 S Standard Clutch Kits

Thestandard clutch version (non EBS)of the 900 RZR / RZR S is quite well calibrated from the factory for stock tires and trails. Testing of the vehicle showed that for most typical trail / mixed use of the vehicle with stock (and most 26- 27″) tires, the stock clutch calibration was fine and no clutch kit is necessary. For many, that means, save your money. This kit is for re-calibration for use insand dunes,or withoversized tires 28+.

This kit can also be used to help with power losses from higher elevations that are typically above 4000 ft.

This is an adjustable kit that can be set up for different tires and situations.For 27″ heavy mud type ( that measure a full 27″ tall and are heavy versions) and all 28″+ sizes, this kit is used.The instruction manual has a “set up guide” that shows how to set up the kit for your application.

Notes:

This is for the two seat regular version only, we have not tested or offer a kit for the 4 seat version of this vehicle.

For 2015 Polaris has replaced the 800 RZR models with a new RZR.This is anew chassis and a new 900 engine version. These new 900 RZR models can come in different forms. Some models have standard (non EBS) clutches, and some have EBS (Engine Braking System) clutches.

For 2015, most of the 50″ or XC that have LE, or EPS (power steering) distinctionhave EBS clutches, and the 2015 base models, and RZR S do not, but be sure to check your application as the clutches on the vehicle are different.

We have built a new customadjustable flyweight for this application and there are kits for both standard, and EBS clutch systems.